NICEIC Approved since 20074.8 Google ratingFree site survey and written quoteFully insured

OUR WORK

Recent Electrical Projects

A selection of domestic, commercial, security and smart home work carried out by Elecwork across Surrey, South London and the South East. Use the filters to browse by type of work.

Electrician carrying out a visual inspection of a domestic consumer unit

Domestic electrical inspection

An Electrical Installation Condition Report (EICR) checks your wiring, consumer unit and protective devices for damage, wear and anything that no longer meets BS 7671. You get a clear report with any defects coded by priority, ideal for landlords, house sales or peace of mind in an older home.

New socket installation

Extra sockets where you actually need them, so no more extension leads trailing across the room. Every new socket and circuit is tested and certified by our NICEIC approved electricians, with USB and flat-plate options to match your decor.

Commercial electrical work installing new circuits

Commercial circuit installation

New circuits added to existing commercial boards for equipment, kitchens, offices and fit-outs. We plan the work around your business hours to keep downtime to a minimum, and every circuit is tested and certified to BS 7671.

Electrician using a clamp meter on distribution board cables

Commercial testing and inspection

Testing commercial circuits under load with a clamp meter helps us spot overloaded circuits, unbalanced phases and nuisance tripping before they cause a shutdown. It forms part of our EICR and fault-finding work for offices, shops and plant rooms.

Washroom hand dryer

A hand dryer installed in a commercial washroom. Modern hand dryers dry hands quickly, use little energy and cut the cost and waste of paper towels.

Commercial boiler room heating controls and boiler wiring by Elecwork electricians

Boiler room BMS panel installation

A new BMS control panel for a commercial boiler room in Central Croydon, wired out to three condensing boilers, pumps and plant isolators. Reliable controls keep the heating running efficiently, make faults easier to find and leave a clean, labelled installation for the BMS engineers.

Commercial boiler room control panel with boiler and pump run, fault and hand-off-auto switches

BMS control panel

Clear run, fault and hand-off-auto switching on the panel door lets site staff see the plant status at a glance and run equipment manually if needed. Every switch, relay and terminal is labelled to make future maintenance quicker and safer.

Hikvision camera installed by Elecwork overlooking a car park

Car park CCTV installation

Hikvision cameras give sharp, reliable footage of car parks and entrances, with remote viewing on your phone through the Hik-Connect app. A well-placed camera deters crime, helps with insurance claims and gives you a clear record when something does happen.

New CCTV camera installed by Elecwork to cover a new gate

Gate CCTV coverage

A camera positioned to cover a new gate, so you can see who is coming and going day and night. We plan camera angles on site to cover entry points properly, avoid blind spots and keep within GDPR guidance for neighbouring property.

Paxton Net2 door entry

Paxton Net2 lets you control who can open which doors and when, all from one easy-to-use system. Add or remove users in seconds, set access times for staff and contractors, and see a full record of who came in. We are a Paxton installer.

Paxton KP50 keypad and card reader being used with an access card

Paxton keypad and card access

Combined keypad and card readers give flexible, secure entry without the hassle of lost keys. If a card goes missing it can be cancelled straight away and a new one issued, with no need to change any locks.

Shelly Pro DIN rail smart modules installed in a distribution board by Elecwork

Shelly smart relays in a consumer unit

Shelly smart relays fitted in the consumer unit let you control and monitor circuits from your phone, set schedules and see energy use. As Shelly Certified Installers, we fit them neatly and safely so your smart home works reliably for years.

Shelly Vintage GU125 smart bulb lighting a dining room

Shelly smart lighting

Shelly smart lighting works with your existing switches and fittings, so you get app, voice and scheduled control without changing the look of your home. It works with Alexa and Google Home, and keeps working locally even if the internet drops.

Shelly 1PM Mini Gen4

A Shelly 1PM Mini Gen4 fitted behind a light switch. The latest Gen4 relays work over Wi-Fi, Bluetooth and Zigbee, measure power use and keep the existing switch working as normal.

Shelly 1PM Mini smart relay connected to an LED driver for app-controlled lighting

Shelly smart lighting control

A Shelly smart relay connected to an LED driver, giving app, voice and scheduled control of the lighting. Smart control can be added to most existing lighting without changing the fittings.

BG SyncEV tethered EV charger on a house wall charging a car

BG SyncEV home charger

A tethered BG SyncEV charger, with the cable fixed to the unit so it is always ready to plug in. Smart charging through the app lets you schedule charging on cheaper off-peak rates. We are a BG SyncEV registered installer.

BG SyncEV compact EV charger installed outside a home

EV charger installation

A home EV charger is much faster and safer than charging from a three-pin plug, and lets you charge overnight on a cheaper tariff. We check your supply and earthing, route the cable neatly, then test, certify and notify the installation.

Hochiki fire alarm control panel with smoke detectors, sounder and manual call point

Fire alarm panel installation

Fire alarm panels, detectors and call points designed and installed to BS 5839 for businesses, HMOs and landlords. A properly designed system gives early warning, protects lives and property, and supports your fire risk assessment. We are UK Fire Alarm Association members.

Advanced MxPro 5 addressable fire alarm panel installed and commissioned by Elecwork

Advanced MxPro 5 fire alarm panel

An Advanced MxPro 5 addressable fire alarm panel installed and commissioned. Addressable systems pinpoint exactly which detector or call point has activated, so alarms and faults are found quickly. Designed and installed to BS 5839.

Loop cards and wiring inside an addressable fire alarm control panel

Fire alarm panel loop wiring

Loop cards and field wiring inside an addressable fire alarm panel, neatly dressed and labelled. Tidy, well-documented panels make servicing and future extensions quicker and cheaper.

Emergency exit lighting in an industrial building

Emergency lighting

Emergency lighting makes sure people can find their way out safely if the power fails. We install and test systems to BS 5266, including the monthly and annual tests you need to keep your fire risk assessment up to date.

Network cabinet installed by Elecwork with patch panels and switches

Network cabinet installation

A tidy network cabinet with patch panels and switches makes your network easier to manage, quicker to fault-find and simple to expand. Everything is labelled and tested, so your IT team or provider knows exactly what goes where.

Engineer connecting network cables to switches in a data cabinet

Structured data cabling

Structured data cabling gives every desk, access point and camera a fast, reliable wired connection back to the comms cabinet. Each run is tested and labelled, giving you a network that is built to last and easy to expand.

New galvanised cable tray containment in a commercial basement car park

Basement cable tray containment

Galvanised cable tray run through a commercial basement car park for a new comms room. Good containment keeps power and data cables separated, protected and accessible, and keeps escape routes clear.

Cable tray, wire basket and Unistrut supports in a London commercial basement

Tray, basket and Unistrut

Cable tray, wire basket and Unistrut supports installed to carry power and data to a new comms room. A properly supported containment route makes adding cables in future quicker and cheaper.

Eaton distribution board with cable tray and wire basket containment in a plant room

New distribution board and containment

A new Eaton distribution board with cable tray and wire basket in a plant room, taken from bare walls to a finished, labelled installation. Clear circuit charts and tidy containment make future maintenance safer and faster.

Elecwork electrician testing a commercial distribution board

Distribution board testing

Testing an existing commercial distribution board as part of an EICR or fault-finding visit. Regular testing helps you meet the Electricity at Work Regulations 1989 and catch problems before they turn into a shutdown.

SWA armoured cables neatly dressed on cable tray in a plant room

SWA cables on cable tray

Steel wire armoured cables dressed and fixed neatly on cable tray. SWA gives tough mechanical protection for sub-main and plant supplies, and good cable management makes plant rooms safer to work in.

Installing wire basket containment

Wire basket containment fitted on drop rods and Unistrut. Basket is quick to install, easy to add cables to later and keeps power and data runs organised overhead.

Elecwork electrician installing an external armoured power supply

External armoured supply

An armoured supply run underground to new external equipment. We plan the route, depth and protection, then test and certify the circuit. Ideal for outbuildings, gates, EV chargers and external plant.

Electrician working on a control panel with relays and labelled wiring

Control panel wiring

Fault finding and wiring in an industrial control panel. We trace control faults, replace failed relays and components, and leave the panel properly labelled to cut downtime on production and plant.

LED linear pendant lights installed in a school library

School library LED upgrade

Old fittings replaced with LED linear pendants on a high library ceiling, carried out around the school timetable. LED lighting cuts energy use and maintenance, and gives brighter, more even light for reading and study.

Surface-mounted LED panel lights installed in a commercial office

Office LED panel upgrade

Surface-mounted LED panels in a commercial office. LED panels give bright, glare-free light, use far less energy than old fluorescent fittings and need very little maintenance.

Exterior LED wall lights lighting a side passage at night

Side passage lighting, Guildford

Exterior LED wall lights installed along a side passage in Guildford. Good outdoor lighting makes paths safer after dark and helps deter intruders, and can run on a timer, sensor or smart control.

New LED pendant and linear lighting installed in a retail shop

Retail shop LED lighting

New LED pendants and linear fittings installed in a retail shop during a refit. Bright, even LED lighting shows products at their best, cuts energy bills and needs very little maintenance.

Turret dome CCTV camera installed in a commercial ceiling by Elecwork

Commercial turret camera

A turret camera mounted on a commercial ceiling. Turret cameras give a clear, wide view with strong night vision, and with no glass dome there is nothing to reflect infrared or collect dirt.

Hikvision ColorVu CCTV camera fitted to the exterior of a commercial building

Hikvision ColorVu camera

Hikvision ColorVu cameras record in full colour even at night, so you can pick out details like clothing and vehicle colours that standard infrared cameras miss. Ideal for covering the outside of commercial buildings.

Bundles of Cat6 data cables in wire basket containment on the ceiling

Cat6 data cabling

Cat6 data cables run neatly in wire basket containment. Cat6 supports gigabit speeds up to 100 metres and is our standard choice for most offices and homes, with Cat6A available where 10 gigabit is needed over longer runs.

Fibre optic cores terminated into LC connectors in a patch panel

Fibre termination

Fibre cores terminated into LC connectors at a school in Kingston. Fibre carries very high speeds over long distances and is immune to electrical interference, making it ideal for backbone links between comms rooms and buildings.

Ubiquiti switch with OM3 and OM4 fibre patch leads in a comms rack

Fibre patching to a Ubiquiti switch

OM3 and OM4 multimode fibre patched to a Ubiquiti switch at a Kingston school. A fibre backbone gives fast, reliable links between comms cabinets, with plenty of capacity for future upgrades.

UniFi outdoor access point with external antennas installed by Elecwork

UniFi outdoor Wi-Fi

A UniFi outdoor access point installed on a brick wall in Upper Norwood to extend Wi-Fi into gardens, car parks and outbuildings. UniFi gives seamless roaming between indoor and outdoor access points, all managed from one app.

Wi-Fi coverage heatmap

A coverage heatmap taken after a UniFi Wi-Fi installation, showing strong signal across the whole home. We plan access point positions before we start and check the coverage afterwards, so there are no dead spots.

UniFi switches and access points ready for a network and Wi-Fi installation

UniFi network kit

UniFi switches and access points ready to install. UniFi gives business-grade Wi-Fi and networking managed from one app, with PoE switches powering each access point over a single Cat6 cable.

Hager distribution board installed and labelled by Elecwork, NICEIC approved contractor

Hager consumer unit

A new Hager consumer unit installed, labelled and certified. Modern boards with RCD and surge protection make your home far safer than an old fuse box, and every board we fit is notified to Building Control through the NICEIC.

New Contactum RCBO consumer unit with surge protection, neatly wired and labelled by Elecwork

New RCBO consumer unit

A new Contactum consumer unit with individual RCBO protection on every circuit and a surge protection device. If one circuit trips, the rest of the house stays on. Neatly wired, labelled, tested and certified.

Consumer unit main switch locked off with a padlock and warning tag for safe isolation before work

Safe isolation and lock-off

Before any work starts the supply is safely isolated, proved dead and locked off with a padlock and warning tag, so nobody can switch it back on while we work.

R1+R2 continuity testing

Test leads set up for R1+R2 continuity testing, part of the checks we carry out on every new circuit and every EICR to confirm the earthing is sound.

Unvented hot water cylinder with immersion and heating control wiring installed by Elecwork

Unvented cylinder electrics, Sanderstead

Electrical connections for a new unvented hot water cylinder in Sanderstead, including the immersion heater and heating control wiring. Correctly wired controls keep your hot water and heating running safely and efficiently.

Shelly H&T Gen3 temperature and humidity sensor

Shelly H&T sensor

The Shelly H&T Gen3 measures temperature and humidity and shows it on a clear e-ink display. Paired with Shelly relays, it can switch heating, extractor fans or dehumidifiers automatically to keep rooms comfortable and help prevent damp.

Smart heating app showing zone schedule and temperature control

Smart heating control

Zone schedules set up in the heating app, so each room is only heated when it is needed. Smart heating cuts wasted energy and lets you adjust everything from your phone. We also install Hive, tado, Drayton Wiser and Google Nest.

Underfloor heating wiring centre

An underfloor heating wiring centre connecting each room thermostat to its zone actuators, so every room only heats when it needs to. Add smart thermostats and the whole system can be controlled from your phone.

myenergi zappi EV charger installed on a brick wall with Elecwork label

myenergi zappi installation, Redhill

The myenergi zappi can charge your car from surplus solar power, switching between solar and grid automatically, or charge on a cheap off-peak tariff. Built-in PEN fault protection means an earth rod is not normally needed. Installed in Redhill, labelled, tested and certified by Elecwork.

Wallbox Pulsar Plus home EV charger installed on a driveway wall

Wallbox Pulsar Plus, Caterham

A Wallbox Pulsar Plus home charger installed in Caterham. It is one of the smallest smart chargers available, charges at up to 7.4 kW on a normal home supply and is controlled through the myWallbox app, so charging can be scheduled on cheaper off-peak rates.

Featured Projects

A closer look at some recent jobs, showing the work from start to finish.

Commercial / Data and Networks

New Comms Room, London: Containment and Distribution

Power, containment and distribution for a new comms room in a London commercial building. We ran cable tray, wire basket and Unistrut supports through the basement and car park, keeping power and data separate and the escape routes clear, then fitted a new distribution board with SWA supplies in the plant room, taking it from bare walls to a finished, labelled installation.

Unistrut supports and cable tray installed in a commercial basement

Galvanised cable tray installed on a plant room wall

Cat6 data cables in wire basket alongside SWA cables on cable tray

Commercial

Boiler Room BMS Panel, Central Croydon

A new BMS control panel installed for a commercial boiler room in Central Croydon, with run, fault and hand-off-auto switching on the front and labelled relays and terminal rail inside. We wired the controls out to three condensing boilers, the circulation pumps and the plant room isolators, all run in conduit.

Heating control panel wiring with labelled relays and terminal rail by Elecwork

Boiler control wiring in flexible conduit with temperature sensors in a commercial plant room

Commercial heating circulation pumps wired with local rotary isolators in a boiler plant room

Heating pump rotary isolator and galvanised steel conduit in a commercial plant room

Data and Networks

Fibre Backbone for a Kingston School

A new fibre backbone for a school in Kingston, terminated into LC patch panels and patched to a Ubiquiti switch with labelled OM3 and OM4 leads, giving fast, reliable links between the comms cabinets.

Lighting

School Library LED Lighting Upgrade

Old fittings replaced with LED linear pendants on a high library ceiling, carried out around the school timetable.

LED linear pendant lights suspended from a high library ceiling

Industrial

External Supply Installation

A new armoured supply run underground to external equipment, with Unistrut posts set in concrete.

Electrician setting Unistrut posts for an external power supply

Data and Networks

Outdoor UniFi Wi-Fi, Upper Norwood

A UniFi outdoor access point fitted to a brick building in Upper Norwood to bring Wi-Fi out across the grounds.

UniFi outdoor Wi-Fi access point installed on a brick wall

CCTV

Commercial CCTV Upgrade

Hikvision turret, bullet, ColorVu and dome cameras installed across a commercial site.

Hikvision bullet CCTV camera installed on a commercial building

Hikvision dome CCTV camera in an office suspended ceiling

EV Charging

myenergi zappi EV Charger, Redhill

A myenergi zappi installed at a home in Redhill, from choosing the location to testing with the car charging.

Outside brick wall chosen for a home EV charger installation

Electrician wiring the connections inside a myenergi zappi EV charger

myenergi zappi EV charger with charging cable connected during testing

EV Charging

Wallbox Pulsar Plus EV Charger, Caterham

A Wallbox Pulsar Plus fitted at a home in Caterham. We ran the supply neatly in conduit along the outside wall, terminated it inside the charger and set it up on the myWallbox app, so the owner can schedule charging on cheaper off-peak rates. Compact, tethered and charging at up to 7.4 kW on a single-phase supply.

Wallbox Pulsar Plus home EV charger before installation

EV charger supply cable run neatly in conduit along an external wall

Supply cable terminated inside a Wallbox EV charger during installation

Wallbox Pulsar Plus EV charger being installed on an external wall

Smart Home

Smart Heating with Shelly

Shelly H&T sensors and app-based zone schedules for smarter heating control.

Shelly H&T Gen3 sensor on a kitchen worktop

ACCREDITED AND APPROVED

Called Ben to discuss replacing all the lighting in one of our offices in London. He was able to arrange to do this out of hours so that it didn’t disrupt our staff. We have had to call him out a few times now with other electrical issues and have been very happy with his response time, and his team are always very professional.

Senior Facilities Manager, Central London

START YOUR PROJECT

Have a Project in Mind?

Tell us about the job and we will arrange a free site survey and written quote.

020 8239 9307 Request a quote